Log
"Errors" display field The number of errors for the selected log are displayed.
"Warnings" display field The number of warnings for the selected log are displayed.
"Display" button The logging function is activated with the "Display" button. The selec‐
ted log is generated as an XML file in the specified layout and shown
in Internet Explorer.
Select "Process cell" and click on the "Display" button to show all proc‐
ess cell errors or warnings. Moreover on a selected object you can
right click to select the "Display Log" dialog to also show object-specific
errors or warnings.
Additional functions
Parameter: Displays.
All the instance parameters that refer to this unit of measure are listed in a dialog box. You
can select certain attributes via a filter, or there is no instance.
OK button
Saves your settings and ends the dialog.
Apply button
Your settings will be saved without closing the dialog. The button is only available if you have
made changes in the dialog.
Cancel button
Closes the dialog without saving changes.
Help button
Opens the SIMATIC BATCH online help for this context.
14.1.12.16 "Operation types" selection
Operation type selection
In the "Process cell data" list you have selected the "Operation type" object.
Run time name in the dialog header
Display of the run time name.
Context help references
14.1 Dialogs
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA 879
To Next Page
Loading...
Need help?
General
