OK button
Saves your settings and closes the dialog.
Apply button
Your settings will be saved without closing the dialog. The button is only available if you have
made changes in the dialog.
Cancel button
Closes the dialog without saving changes.
Help button
Opens the SIMATIC BATCH online help for this context.
14.1.12.11 "Data types" selection
Data types selection
In the "Process cell data" list you have selected the "Data types" object
The following standard data types are specified by the system in the navigation tree:
● Floating point number
● Integer
● String
● Input material
● Output material
● Material
● Source
● Dest.
● Via
● TKey
● Location
● Boolean
The batch types defined by the user follow after the last standard data type. These user data
types are generated, deleted, and changed in the "Global declarations" > Enumerations" folder
of the PCS 7 project in the SIMATIC Manager.
Path in the topmost display field
Logical path within the navigation tree.
Context help references
14.1 Dialogs
SIMATIC BATCH V8.2
872 Operating Manual, 02/2016, A5E35958174-AA
To Next Page
Loading...
Need help?
General
