If, for example, there are values in the "Parameters" tab in the properties dialog of an RPE, a
button is displayed with which you can show or hide the following table columns. All the listed
columns are shown or hidden together.
● Data type
● Source
● Target
● Actual value ID
● Setpoint ID
● Displays
● Modifiable
● Effective immediately
● Formula
● Visible externally
● Data type
System characteristics
This customization is identical for all BATCH client applications such as the BCC, the recipe
editor and the viewer for archived batches.
The default setting is to hide all the columns listed above. Modifications to the column display
only apply as long as the dialog is open and they are not saved permanently for the specific
user.
In the template for the BATCH OS controls, there is a check box in the OS Properties control
configured with the aid of WinCC Dynamics; this check box also shows or hides the table
columns named above. When using the tooltip display, the check box is called "Expanded
parameter display".
Additional information
"Parameters" tab (Page 772)
9.1.4.7 Creating and manipulating objects
Selecting functions
All important functions relating to an object are available in the shortcut menu.
As an alternative, the same functions are also available in the "Edit" menu. Functions that
cannot be executed in the current status of an object are grayed out in the "Edit" menu.
BATCH Control Center
9.1 Starting and operating
SIMATIC BATCH V8.2
256 Operating Manual, 02/2016, A5E35958174-AA
To Next Page
Loading...
Need help?
General
