Result
This assignment is displayed in the properties dialog of the recipe element. When assigning
phases to the recipe element only the phases that can be executed by all the units selected
are available.
10.4.4.2 Assignment of the unit with a hierarchical recipe
A recipe unit procedure (RUP) is designed for a specific selection of applicable units (fixed
number) or a set of conditions for determining the unit selection (variable number depending
on changes in the engineering system).
The units (and the conditions when applicable) are specified in the object properties for the
RUP. In so doing, the unit assignment is made according to the structure of the plant hierarchy
in the engineering system. This means that when additional levels were added to the three-
level batch hierarchy, for example, an area level between process cell and unit, these are also
available as selection criteria in the unit assignment to help make the hierarchy clearer.
If you do not use the online assignment of a unit (Page 529), follow the steps outlined below.
Assignment of the unit with/without conditions?
● If you want to select the units without conditions, follow the procedure described in this
section.
● If you want to select the units with conditions, follow the steps outlined in the section "Unit
selection using conditions for a hierarchical recipe (Page 527)".
Procedure in the BATCH Recipe Editor
1. Open the recipe.
2. Select a RUP (the column is shown on a light blue background).
3. Select the "Properties" command in the shortcut menu (selected with a right-click).
4. Select the "Allocation" tab.
5. First, select the representation of the tree structure:
– Class view: All unit classes without area structure will be listed in the "Unit selection"
field.
– Area view: All areas with the subordinate units are listed in the "Unit selection" field.
6. Select the unit class in the "Device selection" field and deselect those units (unit candidates)
that are not suitable for this recipe unit procedure.
The unit classes and units from the basic engineering are available for selection. By
selecting a unit class and then deselecting the unit candidates, you limit the phases that
can be used in the execution of this recipe unit (displayed in the "Available phases" field).
7. If necessary, select a preferred unit in the "Preferred unit" field.
If no other assignment is made before creating a batch, the unit specified as preferred is
used for the batch execution.
8. Confirm the selection with "OK".
BATCH Recipe Editor
10.4 Creating recipes
SIMATIC BATCH V8.2
524 Operating Manual, 02/2016, A5E35958174-AA
To Next Page
Loading...
Need help?
General
