Example of controlling batch processing
9.8.5.2 Operator commands for recipe steps
During the commissioning phase, for example, you can also hold, resume or abort all the recipe
procedural elements (RUP, SUB, ROP, NOP, RPH) within the hierarchical control recipe. The
commands "Complete step" and "Reset step" are also available. With these commands, you
can also force transitions to enable the next step.
BATCH Control Center
9.8 Batch control
SIMATIC BATCH V8.2
416 Operating Manual, 02/2016, A5E35958174-AA
To Next Page
Loading...
