See also
Basics of configuration (Page 124)
Configuration of the redundant BATCH server (Page 60)
14.1.11.25 BATCH application client
Definition
This object represents a BATCH client application. Here, a BATCH client is a representative
for the BATCH Recipe Editor, the Batch Control Center (BatchCC) for operator control and
monitoring of batches, and the batch data management.
The BATCH server and the BATCH clients of a process cell project generally run on different
PCs. In order to download and distribute the process cell data of a project among these PCs,
a SIMATIC PC station must be created for each BATCH server and BATCH client in the
component view (SIMATIC Manager). These SIMATIC PC stations are configured in HW
Config with the BATCH applications.
See also
Basics of configuration (Page 124)
Configuring the BATCH server (Page 126)
14.1.11.26 SIMATIC BATCH
This opens a dialog box in which all the configuration work relevant to Batch can be undertaken.
Context help references
14.1 Dialogs
SIMATIC BATCH V8.2
852 Operating Manual, 02/2016, A5E35958174-AA
To Next Page
Loading...
Need help?
General
