Result block 4: "Heat_1" element
The displayed symbol indicates that the "Heat" element exists only in the "Recipe example
- V1.0" recipe. The values of all attributes available in this type context are displayed in
the left column.
Result block 5: "Trans_2" element
The displayed symbol indicates that the "Trans_2" element exists only in the "Recipe
example - V1.0" recipe. The values of all attributes available in the type context are dis‐
played in the left column. The system-internal name is used for transitions.
Result block 6: "Agitate_4" element
The displayed symbol indicates that the "Agitate" element exists only in the "Recipe ex‐
ample - V2.0" recipe. The values of all attributes available in the type context are displayed
in the right column.
Result block 7 -> "Trans_5" element
The displayed symbol indicates that the "Trans_5" element exists only in the "Recipe
example - V2.0" recipe. The values of all attributes available in the type context are dis‐
played in the right column. The system-internal name is used for transitions.
9.5.9.3 Special displays and interpretations
Because the explanations in the "Basic principles of the display and interpretation" section are
not sufficient for the following SIMATIC Batch constructs, the particularities for these are
described in this section:
● Simultaneous branch
● Alternative branch
● Synchronization line
● Monitoring container
● Recipe loop
● Transition condition
● ESIG (electronic signature)
● Control strategy
● Substructure/library reference
BATCH Control Center
9.5 Recipes
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA 333
To Next Page
Loading...
