7. You can use the property passed to the unit in a transition query, for example. Another
equipment phase is only executed, for example, when the property of the unit is "clean". In
this case, you configure a process tag as operand1 in the transition wizard and a constant
as operand2. The process tag (clean, dirty) is available under "_Unit_Properties" >
"UnitStatus_Param".
Image 12-6 Configuring the transition condition
8. Save your master recipe and release it for production. The final master recipe can look like
this:
Recommended procedure
12.8 How do I configure and use dynamic unit parameters?
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA 693
To Next Page
Loading...
