Batch name area
The following static and dynamic name elements are available for selection:
● <None>: Not assigned to a special name element.
● Recipe/Formula
● Formula category
● Order
● Order category
The following attributes are available and can be selected for the listed elements:
● Text
● Date
● Time
Recipe/Formula
● Name
● Version
● ID: Identification number for recipes and formulas
● Product name
● Product code
Formula category, order, and order category
● Name
Only if you choose "<None>" as element and "Text" as attribute will the "Additional text" input
box be enabled for text input. Enter any static content of a name here. Note that the total name
length is limited to 32 characters. Too many characters will prevent the batch from being
released.
When you have defined a batch name, click the "Add" button. This applies the selected element
and the attribute in a table display. The batch name comprising these name parts is displayed
in the Example area.
Repeat the process for each desired name-forming element. As a result, the batch name
becomes longer and longer.
The system increments a predefined batch name automatically. The predefined batch name
is retained until it is changed in this dialog or the functionality in the settings for batches is reset
to "No".
Table display
Use the "Up" and "Down" buttons to define which name elements are positioned where in the
batch name. To do so, select a name element in the table display and click the corresponding
"Up" or "Down" button. The newly positioned name elements are shown in the Example
window.
Context help references
14.1 Dialogs
SIMATIC BATCH V8.2
744 Operating Manual, 02/2016, A5E35958174-AA
To Next Page
Loading...
Need help?
General
