Check box Meaning
V7.0.8 This is the archive format of SIMATIC BATCH AS based V7.0 SP2. Sim‐
ilar to the archive format V7.0 SP1 with additional attributes. There is an
XML schema for this that is also installed.
V7.1.2 If you install SIMATIC BATCH V7.1 SP2, this archive format is then set
and used by default. There is an XML schema for this that is also installed.
V8.0.0 If you install SIMATIC BATCH V8.0.0, this archive format is then set and
used by default. There is an XML schema for this that is also installed.
V8.0.1 If you install SIMATIC BATCH V8.0.1, this archive format is then set and
used by default. There is an XML schema for this that is also installed.
V8.1.0 If you install SIMATIC BATCH V8.1.0, this archive format is then set and
used by default. There is an XML schema for this that is also installed.
V8.2.0 If you install SIMATIC BATCH V8.2.0, this archive format is then set and
used as default. There is an XML schema for this that is also installed.
"OK" button
Exits the dialog and saves your settings.
"Standard" button
Click this button to reset all project settings you have changed in this tab to the default setting
"Yes".
"Apply" button
Saves your settings without closing the dialog.
"Cancel" button
Exits the dialog without saving your settings.
"Help" button
Opens the online help for this dialog.
Context help references
14.1 Dialogs
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA 749
To Next Page
Loading...
