SMC Networks LECSB2-T Series User Manual

6. NORMAL GAIN ADJUSTMENT
6 - 21
(d) If an error occurs
Check the error cause referring to the table 6.2 of (1) (e) in this section.
2 s interval
Error code
If an error occurs during the one-touch tuning, the tuning will be forcibly terminated and the
stop symbol and error code from "C 001" to "C 00F" will be displayed by turns with 2 s
interval.
Stop symbol
Initial screen
Pushing the "SET" button will switch to the initial screen.
(e) If an alarm occurs
If an alarm occurs during the one-touch tuning, the tuning will be forcibly terminated and
the alarm No. will be displayed.
One-touch tuning in progress
Alarm display
(f) If a warning occurs
If a warning occurs during the one-touch tuning, the alarm No. of the warning will be
displayed.
When the warning is one which continue the motor driving, the one-touch tuning will be
continued.
One-touch tuning in progress
Alarm display (warning)

SMC Networks LECSB2-T Series Specifications

General

Brand	SMC Networks
Model	LECSB2-T Series
Category	DC Drives
Language	English