Recalling readings
To recall the data stored in a reading buffer:
1. Press the RECALL key.
2. Select DATA or STATISTICS.
3. Select the buffer to display: CHANx-BUFF1 or CHANx-BUFF2 (where X is A on the 2601B,
2611B, or 2635B, or X is A or B on the 2602B, 2604B, 2612B, 2614B, 2634B, or 2636B). The
data or statistics are displayed.
â–ª If you are recalling data, the reading display is on the top left, and the buffer location number
is on the right. The source values are on the lower left side of the display (if enabled); the
timestamp (if used) is on the lower right side.
â–ª If you are recalling statistics, the information includes values for MEAN, STD DEV, SAMPLE
SIZE, MINIMUM, MAXIMUM, and PK-PK.
â–ª The source display field identifies the buffer: SrcA1 (buffer 1), SrcA2 (buffer 2). For
two-channel instruments (2602B, 2604B, 2612B, 2614B, 2634B, 2636B): SrcB1 (buffer 1),
SrcB2 (buffer 2).
Buffer location number
The buffer location number indicates the memory location of the source-measure reading. For
example, location #000001 indicates that the displayed source-measure reading is stored at the first
memory location.
Timestamp
If the timestamp is enabled, the first source-measure reading stored in the buffer (#0000001) is
timestamped at 0.000 seconds. Subsequent readings are timestamped relative to when the first
measurement was made. The interval between readings depends on the reading rate.
Displaying other buffer readings and statistics
To display other readings and statistics in the reading buffer:
1. While still in the buffer recall mode:
â–ª If viewing the data stored in the buffer, turn the navigation wheel to increment and decrement
the selected digit of the location number by one. Press the navigation wheel and then turn it
or use the CURSOR keys to move to the next digit.
â–ª If viewing the statistics stored in the buffer, turn the navigation wheel or use the CURSOR
keys to scroll between MEAN, STD DEV, SAMPLE SIZE, MINIMUM, MAXIMUM, and PK-PK.
2. To exit from the reading buffer recall mode, press the EXIT (LOCAL) key.
To Next Page
Loading...
Need help?
General
