Tektronix KEITHLEY 2600B Series User Manual

Section 9: TSP command reference Series 2600B System SourceMeter® instrument Reference Manual
9-132 2600BS-901-01 Rev. F/August 2021
lan.config.method
This attribute contains the LAN settings configuration method.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
LAN restore defaults
Nonvolatile memory
0 (lan.AUTO)
Usage
method = lan.config.method
lan.config.method = method
method
The method for configuring LAN settings; it can be one of the following values:
▪ 0 or lan.AUTO: Selects automatic sequencing of configuration methods
▪ 1 or lan.MANUAL: Use only manually specified configuration settings
Details
This attribute controls how the LAN IP address, subnet mask, default gateway address, and DNS
server addresses are determined.
When method is lan.AUTO, the instrument first attempts to configure the LAN settings using dynamic
host configuration protocol (DHCP). If DHCP fails, it tries dynamic link local addressing (DLLA). If
DLLA fails, it uses the manually specified settings.
When method is lan.MANUAL, only the manually specified settings are used. Neither DHCP nor
DLLA are attempted.
Example
print(lan.config.method)
Outputs the present method.
For example:
1.00000e+00
Also see
lan.restoredefaults() (on page 9-136)
lan.config.speed
This attribute contains the LAN speed used when restarting in manual configuration mode.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
LAN restore defaults
Nonvolatile memory
100 (100 Mbps)
Usage
speed = lan.config.speed
lan.config.speed = speed
speed
LAN speed setting in Mbps (10 or 100)

Tektronix KEITHLEY 2600B Series Specifications

General

Brand	Tektronix
Model	KEITHLEY 2600B Series
Category	Measuring Instruments
Language	English