Tektronix KEITHLEY 2600B Series User Manual

Series 2600B System SourceMeter® instrument Reference Manual Section 9: TSP command reference
2600BS-901-01 Rev. F/August 2021 9-189
scriptVar.source
This attribute contains the source code of a script.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
(see Details)
No
Not applicable
Not saved
Not applicable
Usage
code = scriptVar.source
scriptVar.source = nil
scriptVar
The name of the variable that references the script that contains the source code
code
A string that contains the body of the script
Details
The loadscript or loadandrunscript and endscript keywords are not included in the source
code.
The body of the script is a single string with lines separated by the new line character.
The instrument automatically stores the source for all scripts that are loaded on the instrument. To
free up memory or to obfuscate the code, assign nil to the source attribute of the script. Although
this attribute is writable, it can only be set to the nil value.
Example
test7 = script.new("display.clear() display.settext('Hello from my test')", "")
print(test7.source)
This example creates a script called test7 that displays a message on the front panel and retrieves the source
code.
Output:
display.clear() display.settext('Hello from my test')
Also see
scriptVar.list() (on page 9-185)
serial.baud
This attribute configures the baud rate for the RS-232 port.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
Not applicable
Nonvolatile memory
9600
Usage
baud = serial.baud
serial.baud = baud
baud
The baud rate (300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, or 115200)

Tektronix KEITHLEY 2600B Series Specifications

General

Brand	Tektronix
Model	KEITHLEY 2600B Series
Category	Measuring Instruments
Language	English