Tektronix KEITHLEY 2600B Series

Series 2600B System SourceMeter® instrument Reference Manual Section 8: Instrument programming
2600BS-901-01 Rev. F/August 2021 8-99
TSP-Net instrument commands: General device control
The following instrument commands provide general device control:
tspnet.clear() (on page 9-398)
tspnet.connect() (on page 9-399)
tspnet.disconnect() (on page 9-400)
tspnet.execute() (on page 9-401)
tspnet.idn() (on page 9-402)
tspnet.read() (on page 9-403)
tspnet.readavailable() (on page 9-404)
tspnet.reset() (on page 9-404)
tspnet.termination() (on page 9-405)
tspnet.timeout (on page 9-406)
tspnet.write() (on page 9-410)
TSP-Net instrument commands: TSP-enabled device control
The following instrument commands provide TSP-enabled device control:
tspnet.tsp.abort() (on page 9-406)
tspnet.tsp.abortonconnect (on page 9-407)
tspnet.tsp.rbtablecopy() (on page 9-408)
tspnet.tsp.runscript() (on page 9-409)