Tektronix KEITHLEY 2600B Series User Manual

Section 9: TSP command reference Series 2600B System SourceMeter® instrument Reference Manual
9-382 2600BS-901-01 Rev. F/August 2021
trigger.timer[N].wait()
This function waits for a trigger.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
Yes
Usage
triggered = trigger.timer[N].wait(timeout)
triggered
Trigger detection indication
N
Trigger timer number (1 to 8)
timeout
Maximum amount of time in seconds to wait for the trigger
Details
If one or more trigger events were detected since the last time trigger.timer[N].wait() or
trigger.timer[N].clear() was called, this function returns immediately.
After waiting for a trigger with this function, the event detector is automatically reset and rearmed.
This is true regardless of the number of events detected.
Example
triggered = trigger.timer[3].wait(10)
print(triggered)
Waits up to 10 s for a trigger on timer 3.
If false is returned, no trigger was detected during the 10 s timeout.
If true is returned, a trigger was detected.
Also see
trigger.timer[N].clear() (on page 9-375)
trigger.wait()
This function waits for a command interface trigger event.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
No
Usage
triggered = trigger.wait(timeout)
triggered
true: A trigger was detected during the timeout period
false: No triggers were detected during the timeout period
timeout
Maximum amount of time in seconds to wait for the trigger

Tektronix KEITHLEY 2600B Series Specifications

General

Brand	Tektronix
Model	KEITHLEY 2600B Series
Category	Measuring Instruments
Language	English