Tektronix KEITHLEY 2600B Series User Manual

Section 9: TSP command reference Series 2600B System SourceMeter® instrument Reference Manual
9-92 2600BS-901-01 Rev. F/August 2021
eventlog.enable
This attribute enables or disables the event log.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
Instrument reset
Recall setup
Not saved
1 (eventlog.ENABLE)
Usage
status = eventlog.enable
eventlog.enable = status
status
The enable status of the event log:
1 or eventlog.ENABLE: Event log enable
0 or eventlog.DISABLE: Event log disable
Details
When the event log is disabled (eventlog.DISABLE or 0), no new events are added to the event
log. You can, however, read and remove existing events.
When the event log is enabled, new events are logged.
Example
print(eventlog.enable)
eventlog.enable = eventlog.DISABLE
print(eventlog.enable)
Displays the present status of the 2600B event log.
Output:
1.00000e+00
0.00000e+00
Also see
eventlog.all() (on page 9-90)
eventlog.clear() (on page 9-91)
eventlog.count (on page 9-91)
eventlog.next() (on page 9-92)
eventlog.overwritemethod (on page 9-93)
eventlog.next()
This function returns the oldest unread event message from the event log and removes it from the event log.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
Yes
Usage
logString = eventlog.next()
logString
The next log entry

Tektronix KEITHLEY 2600B Series Specifications

General

Brand	Tektronix
Model	KEITHLEY 2600B Series
Category	Measuring Instruments
Language	English