Keithley I/O layer
The Keithley I/O Layer (KIOL) is a software package that contains several utilities and drivers. It is
mainly used as a supplement to IVI drivers or application software like Test Script Builder (TSB).
For additional detail on the Keithley I/O layer, including computer requirements and installation
instructions, see the tek.com/keithley website.
Keithley Configuration Panel
The Keithley Configuration Panel is a configuration utility for IVI drivers, similar to NI-MAX. It can also
autodetect USBTMC instruments and LAN instruments that support the VXI-11 protocol.
Keithley Communicator
The Keithley Communicator is a dumb terminal program that uses VISA to communicate with
the instrument.
How to install the Keithley I/O Layer
Before installing, it is a good practice to check the Product Support and Downloads web page
(tek.com/product-support) to verify that you have the latest version of the Keithley I/O Layer.
You can download the Keithley I/O Layer from the Keithley website.
To install the Keithley I/O Layer from the Keithley website:
1. Download the Keithley I/O Layer Software from the Product Support and Downloads web page.
The software is a single compressed file.
2. Run the downloaded file from the temporary directory.
3. Follow the instructions on the screen to install the software.
4. Reboot your computer to complete the installation.
To Next Page
Loading...
