Tektronix KEITHLEY 2600B Series

Section 9: TSP command reference Series 2600B System SourceMeter® instrument Reference Manual
9-154 2600BS-901-01 Rev. F/August 2021
localnode.description
This attribute stores a user-defined description and mDNS service name of the instrument.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
Not applicable
Nonvolatile memory
Instrument specific (see Details)
Usage
localnode.description = "description"
description = localnode.description
description
User-defined description and mDNS service name of the instrument; use a string of
63 characters or less
Details
This attribute stores a string that contains a description of the instrument. This value appears on LXI
welcome page of the instrument. The value of this attribute is also used as the mDNS service name
of the instrument.
The factory default value of this attribute is "Keithley Instruments SMU <model number> - <serial
number>", where <model number> and <serial number> are replaced with the actual model number
and serial number of the instrument. Setting this attribute to an empty string (in other words, setting
this attribute to a string of length zero or a string consisting entirely of whitespace characters) reverts
the description to the factory default value.
When using this command from a remote node, replace localnode with the node reference, for
example node[5].description.
Example
description = "System in Lab 05"
localnode.description = description
Set description to System in Lab 05.
Also see
None
localnode.license
This attribute returns the product license agreements.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (R)
Yes
Not applicable
Nonvolatile memory
Not applicable
Usage
license_agreement = localnode.license
license_agreement
The text of the license agreements