Tektronix KEITHLEY 2600B Series User Manual

Section 9: TSP command reference Series 2600B System SourceMeter® instrument Reference Manual
9-82 2600BS-901-01 Rev. F/August 2021
Also see
display.clear() (on page 9-65)
display.getcursor() (on page 9-67)
display.gettext() (on page 9-69)
display.screen (on page 9-78)
display.setcursor() (on page 9-80)
display.smuX.digits
This attribute sets the front-panel display resolution of the selected measurement.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
Instrument reset
Recall setup
Saved setup
5 (display.DIGITS_5_5)
Usage
digits = display.smuX.digits
display.smuX.digits = digits
digits
Set digits to one of the following values:
▪ Select 4½ digit resolution (4 or display.DIGITS_4_5)
▪ Select 5½ digit resolution (5 or display.DIGITS_5_5)
▪ Select 6½ digit resolution (6 or display.DIGITS_6_5)
X
Source-measure unit (SMU) channel (for example, display.smua.digits
applies to SMU channel A)
Details
SMU A and SMU B can be set for different measurement display resolutions.
Example
display.smua.digits = display.DIGITS_5_5
Select 5½ digit resolution for SMU A.
Also see
None
display.smuX.limit.func
If you are using a display mode that shows a single channel, this attribute specifies the type of limit value
setting displayed.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
Instrument reset
Recall setup
Saved setup
0 (display.LIMIT_IV)

Tektronix KEITHLEY 2600B Series Specifications

General

Brand	Tektronix
Model	KEITHLEY 2600B Series
Category	Measuring Instruments
Language	English