Capabilities and features
2600B System SourceMeter
®
instruments have the following features:
• 4.5, 5.5, or 6.5 digit display resolution
• Resistance and power measurement functions
• Four-quadrant sink or source operation
• Contact check function (not available on the 2604B, 2614B, and 2634B)
• High-capacitance mode for load impedance up to 50 µF (microfarads)
• Linear, logarithmic, and custom sweeping and pulsing
• Filtering to reduce reading noise
• A trigger model that supports extensive triggering and synchronization schemes at
hardware speeds
• Internal memory that stores five user setup options
• Dedicated reading buffers that can each store and recall over 140,000 measurements; additional
dynamic reading buffers can be created
• USB flash drive access for saving data buffers, test scripts, and user setups
• Digital I/O port that allows the 2600B to control other devices (digital I/O lines not available on the
Models 2604B, 2614B, and 2634B)
• Compatible with Keithley IVy, a wireless I-V characterization tool
• LXI
®
version 1.4 Core 2011 compliant
• Embedded TSP scripting engine that is accessible from any host interface; responds to
high-speed test scripts comprised of instrument control commands
• TSP-Link
®
expansion bus that allows TSP-enabled instruments to trigger and communicate with
each other; advanced Test Script Processor (TSP
®
) scripting engine features enable parallel
script execution across the TSP-Link network (not available on the 2604B, 2614B, and 2634B)
• Supports IEEE-488 (GPIB), RS-232, Universal Serial Bus (USB), and ethernet local area network
(LAN) connections
To Next Page
Loading...
Need help?
General
