Tektronix KEITHLEY 2600B Series

Series 2600B System SourceMeter® instrument Reference Manual Section 9: TSP command reference
2600BS-901-01 Rev. F/August 2021 9-161
localnode.revision
This attribute stores the firmware revision level.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (R)
Yes
Not applicable
Not applicable
Not applicable
Usage
revision = localnode.revision
revision
Firmware revision level
Details
This attribute indicates the revision number of the firmware that is presently running in the instrument.
When using this command from a remote node, replace localnode with the node reference. For
example, node[5].revision.
Example
print(localnode.revision)
Outputs the present revision level.
Sample output:
1.0.0
Also see
localnode.description (on page 9-154)
localnode.model (on page 9-156)
localnode.serialno (on page 9-161)
localnode.serialno
This attribute stores the serial number of the instrument.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (R)
Yes
Not applicable
Not applicable
Not applicable
Usage
serialno = localnode.serialno
serialno
The serial number of the instrument