To Next Page

To Previous Page

Section 9: TSP command reference Series 2600B System SourceMeter® instrument Reference Manual

9-8 2600BS-901-01 Rev. F/August 2021

Details

This command enables or disables the beeper. When enabled, a beep signals that a front-panel key

has been pressed. Disabling the beeper also disables front-panel key clicks.

Example

beeper.enable = beeper.ON

beeper.beep(2, 2400)

Enables the beeper and generates a two-second, 2400 Hz tone.

Also see

beeper.beep() (on page 9-7)

bit.bitand()

This function performs a bitwise logical AND operation on two numbers.

Type

TSP-Link accessible

Affected by

Where saved

Default value

Function

Usage

result = bit.bitand(value1, value2)

result

Result of the logical AND operation

value1

Operand for the logical AND operation

value2

Operand for the logical AND operation

Details

Any fractional parts of value1 and value2 are truncated to form integers. The returned result is

also an integer.

Example

testResult = bit.bitand(10, 9)

print(testResult)

Performs a logical AND operation on decimal 10 (binary 1010) with decimal 9 (binary 1001), which returns a

value of decimal 8 (binary 1000).

Output:

8.00000e+00

Also see

Bit manipulation and logic operations (on page 7-4)

bit.bitor() (on page 9-9)

bit.bitxor() (on page 9-9)

Tektronix KEITHLEY 2600B Series User Manual

Questions and Answers: