Tektronix KEITHLEY 2600B Series User Manual

Section 9: TSP command reference Series 2600B System SourceMeter® instrument Reference Manual
9-388 2600BS-901-01 Rev. F/August 2021
tsplink.trigger[N].assert()
This function simulates the occurrence of the trigger and generates the corresponding event ID. This command is
not available on the 2604B, 2614B, or 2634B.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
Yes
Usage
tsplink.trigger[N].assert()
N
The trigger line (1 to 3)
Details
The set pulse width determines how long the trigger is asserted.
Example
tsplink.trigger[2].assert()
Asserts trigger on trigger line 2.
Also see
tsplink.trigger[N].clear() (on page 9-388)
tsplink.trigger[N].mode (on page 9-390)
tsplink.trigger[N].overrun (on page 9-391)
tsplink.trigger[N].pulsewidth (on page 9-392)
tsplink.trigger[N].release() (on page 9-393)
tsplink.trigger[N].stimulus (on page 9-394)
tsplink.trigger[N].wait() (on page 9-395)
tsplink.trigger[N].clear()
This function clears the event detector for a LAN trigger. This command is not available on the 2604B, 2614B, or
2634B.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
Yes
Usage
tsplink.trigger[N].clear()
N
The trigger line (1 to 3) to clear
Details
The trigger event detector enters the detected state when an event is detected.
tsplink.trigger[N].clear() clears a trigger event detector, discards the history of the trigger
line, and clears the tsplink.trigger[N].overrun attribute.

Tektronix KEITHLEY 2600B Series Specifications

General

Brand	Tektronix
Model	KEITHLEY 2600B Series
Category	Measuring Instruments
Language	English