Parallel script execution
dataqueue.add() (on page 9-49)
dataqueue.CAPACITY (on page 9-50)
dataqueue.clear() (on page 9-50)
dataqueue.count (on page 9-51)
dataqueue.next() (on page 9-52)
node[N].execute() (on page 9-165)
node[N].getglobal() (on page 9-166)
node[N].setglobal() (on page 9-167)
tsplink.group (on page 9-383)
tsplink.master (on page 9-384)
tsplink.node (on page 9-384)
Queries and response messages
You can use the print(), printbuffer(), and printnumber() functions to query the
instrument and generate response messages. The format attributes control how the data is formatted
for the print functions used.
The localnode commands determine if generated errors are automatically sent and if prompts
are generated.
format.asciiprecision (on page 9-100)
format.byteorder (on page 9-101)
format.data (on page 9-102)
localnode.prompts (on page 9-158)
localnode.prompts4882 (on page 9-159)
localnode.showerrors (on page 9-162)
print() (on page 9-170)
printbuffer() (on page 9-171)
printnumber() (on page 9-172)
Reading buffer
Reading buffers capture measurements, ranges, instrument status, and output states of
the instrument.
bufferVar.appendmode (on page 9-17)
bufferVar.basetimestamp (on page 9-18)
bufferVar.cachemode (on page 9-19)
bufferVar.capacity (on page 9-20)
bufferVar.clear() (on page 9-21)
bufferVar.clearcache() (on page 9-21)
bufferVar.collectsourcevalues (on page 9-22)
bufferVar.collecttimestamps (on page 9-23)
bufferVar.fillcount (on page 9-24)
bufferVar.fillmode (on page 9-25)
bufferVar.measurefunctions (on page 9-25)
bufferVar.measureranges (on page 9-26)
To Next Page
Loading...
