Tektronix KEITHLEY 2600B Series User Manual

Section 9: TSP command reference Series 2600B System SourceMeter® instrument Reference Manual
9-134 2600BS-901-01 Rev. F/August 2021
lan.linktimeout
This attribute contains the LAN link timeout period.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
LAN restore defaults
Nonvolatile memory
20 (20 s)
Usage
timeout = lan.linktimeout
lan.linktimeout = timeout
timeout
The LAN link monitor time-out period (in seconds)
Details
You must enable the command lan.autoconnect before you can use this attribute.
The timeout value represents the amount of time that passes before the instrument disconnects
from the LAN due to the loss of the LAN link integrity.
The LAN interface does not disconnect if the connection to the LAN is reestablished before the
timeout value expires.
If the LAN link integrity is not restored before the timeout value expires, the instrument begins to
monitor for a new connection.
Example
print(lan.linktimeout)
Outputs the present LAN link timeout setting.
Also see
lan.autoconnect (on page 9-125)
lan.restoredefaults() (on page 9-136)
lan.lxidomain
This attribute contains the LXI domain.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
LAN restore defaults
Nonvolatile memory
0
Usage
domain = lan.lxidomain
lan.lxidomain = domain
domain
The LXI domain number (0 to 255)
Details
This attribute sets the LXI domain number.
All outgoing LXI packets are generated with this domain number. All inbound LXI packets are ignored
unless they have this domain number.

Tektronix KEITHLEY 2600B Series Specifications

General

Brand	Tektronix
Model	KEITHLEY 2600B Series
Category	Measuring Instruments
Language	English