Tektronix KEITHLEY 2600B Series User Manual

Section 9: TSP command reference Series 2600B System SourceMeter® instrument Reference Manual
9-188 2600BS-901-01 Rev. F/August 2021
scriptVar.save()
This function saves the script to nonvolatile memory or to a USB flash drive.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
No
Usage
scriptVar.save()
scriptVar.save("filename")
scriptVar
The name of variable that references the script
filename
A string that contains the file name to use when saving the script to a USB flash drive
Details
The scriptVar.save() function saves a script to nonvolatile memory or a USB flash drive. The
root folder of the USB flash drive has the absolute path /usb1/.
If no filename is specified (the file name parameter is an empty string), the script is saved to
internal nonvolatile memory. Only a script with filename defined can be saved to internal nonvolatile
memory. If a filename is given, the script is saved to the USB flash drive.
You can add the file extension, but it is not required. The only allowed extension is .tsp (see
Example 2).
Example 1
test8.save()
Saves the script referenced by the variable test8 to nonvolatile memory.
Example 2
test8.save("/usb1/myScript.tsp")
Saves the script referenced by the variable test8 to a file named myScript.tsp on your USB flash drive.
Also see
Save a user script (on page 8-10)

Tektronix KEITHLEY 2600B Series Specifications

General

Brand	Tektronix
Model	KEITHLEY 2600B Series
Category	Measuring Instruments
Language	English