Series 2600B System SourceMeter® instrument Reference Manual Section 8: Instrument programming
2600BS-901-01 Rev. F/August 2021 8-41
LAN cable connection
The 2601B, 2602B, 2611B, 2612B, 2635B, and 2636B include two LAN crossover cables. Use one
cable for the TSP-Link
®
network and use the other cable for the LAN.
One cable is provided for the 2604B, 2614B, and 2634B for connection to the LAN. The TSP-Link
®
is
not available on these models.
Use the following figure as a guide when making LAN connections.
Figure 89: 2600B LAN connection
1 2600B ethernet port (LAN)
2 Straight-through LAN cable or crossover LAN cable
3 Ethernet port (on the host computer)
Use the LXI Discovery Tool
To find the IP address of the 2600B from a computer, use the LXI Discovery Tool, a utility that is
available from the Resources tab of the LXI Consortium website (lxistandard.org).
To Next Page
Loading...
