Section 14: Model 2400 emulation Series 2600B System SourceMeter® instrument Reference Manual
14-6 2600BS-901-01 Rev. F/August 2021
Model 2400 SCPI command support
The following table provides a listing of Model 2400 commands and emulation support for the 2600B.
In the supported column: Yes indicates the command is fully supported; No indicates the command is
not supported; Partially indicates the command is supported, but with stipulations as noted in Model
2400 SCPI command compatibility (on page 14-14).
:CALCulate[1]:DATA:LATest?
:CALCulate[1]:MATH[:EXPRession]
:CALCulate[1]:MATH[:EXPRession]?
:CALCulate[1]:MATH[:EXPRession]:CATalog?
:CALCulate[1]:MATH[:EXPRession][:DEFine] <form>
:CALCulate[1]:MATH[:EXPRession][:DEFine]?
:CALCulate[1]:MATH[:EXPRession]:DELete:ALL
:CALCulate[1]:MATH[:EXPRession]:DELete[:SELected] <SPD>
:CALCulate[1]:MATH[:EXPRession]:NAME <SPD>
:CALCulate[1]:MATH[:EXPRession]:NAME?
:CALCulate[1]:MATH:UNITs <name>
:CALCulate[1]:MATH:UNITs?
:CALCulate[1]:STATe <Bool>
:CALCulate2:CLIMits:BCONtrol IMMediate|END
:CALCulate2:CLIMits:BCONtrol?
:CALCulate2:CLIMits:CLEar:AUTO <Bool>
:CALCulate2:CLIMits:CLEar:AUTO?
:CALCulate2:CLIMits:CLEar[:IMMediate]
:CALCulate2:CLIMits:FAIL:SMLocation <NRf>|NEXT
:CALCulate2:CLIMits:FAIL:SMLocation?
:CALCulate2:CLIMits:FAIL:SOURce2 <NRf>|<NDN>
:CALCulate2:CLIMits:FAIL:SOURce2?
:CALCulate2:CLIMits:MODE GRADing|SORTing
:CALCulate2:CLIMits:MODE?
:CALCulate2:CLIMits:PASS:SMLocation <NRf>|NEXT
:CALCulate2:CLIMits:PASS:SMLocation?
:CALCulate2:CLIMits:PASS:SOURce2 <NRf>|<NDN>
:CALCulate2:CLIMits:PASS:SOURce2?
:CALCulate2:FEED CALCulate[1]|VOLTage|CURRent|RESistance
:CALCulate2:LIMit[1]:COMPliance:FAIL IN|OUT
:CALCulate2:LIMit[1]:COMPliance:FAIL?
:CALCulate2:LIMit[1]:COMPliance:SOURce2 <NRf>|<NDN>
:CALCulate2:LIMit[1]:COMPliance:SOURce2?
:CALCulate2:LIMit[1]:FAIL?
:CALCulate2:LIMit[1]:STATe <Bool>
:CALCulate2:LIMit[1]:STATe?
:CALCulate2:LIMit[2|3|5-12]:FAIL?
:CALCulate2:LIMit[2|3|5-12]:LOWer[:DATA] <NRf>
To Next Page
Loading...
Need help?
General
