Series 2600B System SourceMeter® instrument Reference Manual Section 8: Instrument programming
2600BS-901-01 Rev. F/August 2021 8-91
Figure 109: Single TSP-Link network with groups
The following table shows an example of the functions of a single TSP-Link network. Each group in
this example runs a different test script than the other groups, which allows the system to run multiple
tests simultaneously.
TSP-Link network group functions
Initiates and runs a test script on node 2
Initiates and runs a test script on node 5
Initiates and runs a test script on node 6
Runs the test script initiated by the master node
Initiates remote operations on node 3
Performs remote operations initiated by node 2
Runs the test script initiated by the master node
Initiates remote operations on node 4
Performs remote operations initiated by node 5
Runs the test script initiated by the master node
To Next Page
Loading...
Need help?
General
