Toptech Systems MultiLoad II User Manual

Chapter 9 – Weights & Measures
304
Firmware Version 3/4.31.37
Tr=Trm
Dr=Dr’ OR Drm
Nr=Nrm
Mr=Mrm
Where: Gr=Gross volume loaded for the Regular component
Tr=Temperature for the Regular component
Dr=Density for the Regular component
Dr’=Density specified for the Regular component
Nr=Net volume loaded for the Regular component
Mr=Mass loaded for the Regular component
Premium meter (Meter Level) values are reported as:
Gpm=M2
Tpm=T2
Dpm=D2 OR Dp
Npm=Gpm*VCFp(Tpm,Dpm)
Mpm=Npm * Dpm OR Mpm=Gpm * Dpm
Where: Gpm=Gross volume loaded for the Premium Meter
M2=Gross volume reported by meter M2
Tpm=Temperature for the Premium Meter
T2= Volume weighted average temperature reported by probe T2
Dpm=Density for the Premium Meter
D2=Volume weighted average Density measured OR specified for meter M2
Dp=Density specified for the Premium component
Npm=Net volume loaded for the Premium Meter
VCFp=API Correction Table for Premium
Mpm=Mass loaded for the Premium Meter
Premium product (Component Level) values are reported as:
Gp=Gpm
Tp=Tpm
Dp=Dp’ OR Dpm
Np=Npm
Mp=Mpm
Where: Gp=Gross volume loaded for the Premium component
Tp=Temperature for the Premium component
Dp=Density for the Premium component
Dp’=Density specified for the Premium component
Np=Net volume loaded for the Premium component
Mp=Mass loaded for the Premium component
Blended product (Preset Level) values reported as:
Gb=Gr + Gp (value not to be used for trade)
Tb=((Tr*Gr) + (Tp*Gp)) / Gb (value not to be used for trade)
Db=((Dr*Gr) + (Dp*Gp)) / Gb (value not to be used for trade)
Nb=Nr + Np

Toptech Systems MultiLoad II Specifications

General

Brand	Toptech Systems
Model	MultiLoad II
Category	Control Unit
Language	English