Toptech Systems MultiLoad II User Manual

Chapter 10– Views and Inquiries
331
Firmware Version 3/4.31.37
Parameter Descriptions
Total Gross
Total gross volume of the component delivered.
Total Net
Total net volume of the component delivered.
Total Mass
Total mass of the component delivered.
Authorized Gross
Total authorized gross volume of the component delivered.
Authorized Net
Total authorized net volume of the component delivered.
Authorized Mass
Total authorized mass of the component delivered.
Unauthorized Gross
Total unauthorized gross volume of the component delivered.
Unauthorized Net
Total unauthorized net volume of the component delivered.
Unauthorized Mass
Total unauthorized mass of the component delivered.
Notes:
- Volume numbers displayed are whole numbers or with 1/100 resolution depending on the current
setting of the “Use Hundredths” RCU W&M Parameter.
- The numbers on the left indicate volumes in non-resettable totalizers.
- The numbers on the right indicate volumes in resettable totalizers.
Use the CLR key to zero out the resettable totalizers.
10.3.4 VIEWING ADDITIVE TOTALIZERS
From the View Totalizers Menu, select Additives. After selecting the preset and additive, the Additive Totalizers
screen displays:
Parameter Descriptions:
Total Gross
Total gross volume through the additive meter.
Authorized Gross
Total authorized gross volume through the additive meter.
PRE #1 ADTV #1 (Adtv 001 ) TOTALIZERS
Total Gross:000000000 (000000000)
Authorized Gross:000000000 (000000000)
Unauthorized Gross:000000000 (000000000)
Meter Creep Gross:000000000 (000000000)
CLeaR Next Prev Exit

Toptech Systems MultiLoad II Specifications

General

Brand	Toptech Systems
Model	MultiLoad II
Category	Control Unit
Language	English