Toptech Systems MultiLoad II

Chapter 9 – Weights & Measures
255
Firmware Version 3/4.31.37
8.12 PCM COMMUNICATIONS
Use this function to determine if a PCM is communicating with the MultiLoad II.
1. From the Diagnostics Menu, select PCM Com.
2. The PCM COM Diagnostics screen displays:
3. A PCM that is not communicating will display ERR.
4. When communications are restored, the ERR message will change to OK.
D I A G N O S T I C S M E N U
Card Reader Meters
COM Loopback Components
Serial Ports Additives
Network Test Sampler
Keypad Tanks
Display Custom Logic
Unicode
FCM Com
PCM Com
FCM Health
PCM Health
RCU
Bay
Preset
Next Prev Exit Enter
004 PCM COM DIAGNOSTICS
00-Ok
Exit