Toptech Systems MultiLoad II User Manual

Chapter 4 – General Configuration
75
Firmware Version 3/4.31.37
4.3.7 E-MAIL SETUP
After changes are made in this screen, exiting program mode is required for the changes to take effect.
Parameter
Description
eMail
Enable or Disable the eMail feature.
SMTP Server
The server address/name that the MultiLoad will connect to
FROM
This will be in the From section of the eMail (optional)
TO
The eMail address that you want to send the eMail to.
When entering an E-mail address, SMTP Server, Username, or Password, it possible to enter in lower case
characters. You can do this by pressing Next, or Prev, once you select the parameter and are able to edit the
text. See the example below.
NETWORK E-MAIL SETUP
E-Mail (PORT 25): DISABLD__________
SMTP Server: mail.example.com
FROM: fromname@domain.com
TO: toname@domain.com
Email Messages
Next Prev Exit Enter

Toptech Systems MultiLoad II Specifications

General

Brand	Toptech Systems
Model	MultiLoad II
Category	Control Unit
Language	English