Toptech Systems MultiLoad II User Manual

Chapter 10– Views and Inquiries
330
Firmware Version 3/4.31.37
Notes:
- Volume numbers displayed are whole numbers or with 1/100 resolution depending on the current
setting of the “Use Hundredths” RCU W&M Parameter.
- The numbers on the left indicate volumes in non-resettable totalizers.
- The numbers on the right indicate volumes in resettable totalizers.
Use the CLR key to zero out the resettable totalizers.
10.3.3 VIEWING COMPONENT TOTALIZERS
From the View Totalizers Menu, select Components. After selecting the preset and component, the Component
Totalizers screen displays:
PRE #1 CMP #1 (Base 001 ) TOTALIZERS
Total Gross:0000006.31 0000006.31
Total Net :0000006.31 0000006.31
Total Mass :0000006.31 0000006.31
Authorized Gross:0000006.31 0000006.31
Authorized Net :0000006.31 0000006.31
Authorized Mass :0000006.31 0000006.31
Unauthorized Gross:0000000.00 0000000.00
Unauthorized Net :0000000.00 0000000.00
Unauthorized Mass :0000000.00 0000000.00
CLeaR Next Prev Exit
PRE #1 CMP #1 (Base 001 ) TOTALIZERS
Total Gross:000000631 (000000631)
Total Net :000000631 (000000631)
Total Mass :000000631 (000000631)
Authorized Gross:000000631 (000000631)
Authorized Net :000000631 (000000631)
Authorized Mass :000000631 (000000631)
Unauthorized Gross:000000000 (000000000)
Unauthorized Net :000000000 (000000000)
Unauthorized Mass :000000000 (000000000)
CLeaR Next Prev Exit

Toptech Systems MultiLoad II Specifications

General

Brand	Toptech Systems
Model	MultiLoad II
Category	Control Unit
Language	English