Firmware Version 3/4.31.37
2.6 EXTERNAL FCM (FLOW CONTROL
MODULE)
The MultiLoad Flow Control Module (FCM) is a state-of-
the-art device that delivers the maximum in flexible,
modular flow control processing. The FCM contains its
own microprocessor for digital valve control, meter pulse
counts and factoring, additive injection, pump and meter
permissives, and more. As a major component of the
MultiLoad, the FCM functions as “the preset on a card.”
Its highly modular design allows you to satisfy your
current flow control needs and to expand easily and
inexpensively as your needs grow. Whether it’s single
product loading, ratio blending, or sequential blending,
the MultiLoad can handle all your flow control
requirements – now and into the future.
The primary purpose of the FCM is to provide maximum
control of a single meter run. Each FCM controls up to
one meter run. FCM’s can be ganged together to form
multiple component ratio or sequential blend spots or for
single product delivery on multiple arms.
To Next Page
Loading...
Need help?
General
