Firmware Version 3/4.31.37
If the Alarm message is longer than the display screen allows, the message will wrap to the next line.
To clear all active alarms, press the CLR key. However, certain alarms, such as RTD ERROR, will not clear until
the condition has been corrected.
10.3 VIEWING TOTALIZERS
From the Views and Inquiry Menu select Totalizers. The View Totalizers Menu displays:
It is also possible to go straight to this view screen via code 4448 combined with NEXT.
10.3.1 VIEWING PRESET TOTALIZERS
From the View Totalizers Menu, select Presets. After selecting the preset, the Preset Totalizers screen displays:
PRE #1 (Preset 001) TOTALIZERS
Total Gross:000000631 (000000631)
Total Net :000000631 (000000631)
Total Mass :000000631 (000000631)
Authorized Gross:000000631 (000000631)
Authorized Net :000000631 (000000631)
Authorized Mass :000000631 (000000631)
Unauthorized Gross:000000000 (000000000)
Unauthorized Net :000000000 (000000000)
Unauthorized Mass :000000000 (000000000)
CLeaR Next Prev Exit
To Next Page
Loading...