Toptech Systems MultiLoad II User Manual

Chapter 10– Views and Inquiries
328
Firmware Version 3/4.31.37
Parameter Descriptions
Total Gross
Total gross volume through the preset (load arm).
Total Net
Total net volume through the preset (load arm).
Total Mass
Total mass through the preset(load arm).
Authorized Gross
Total authorized gross volume through the preset (load arm).
Authorized Net
Total authorized net volume through the preset (load arm).
Authorized Mass
Total authorized mass through the preset (load arm).
Unauthorized Gross
Total unauthorized gross volume through the preset (load arm).
Unauthorized Net
Total unauthorized net volume through the preset (load arm).
Unauthorized Mass
Total unauthorized mass through the preset (load arm).
Notes:
- Volume numbers displayed are whole numbers or with 1/100 resolution depending on the current
setting of the “Use Hundredths” RCU W&M Parameter.
- The numbers on the left indicate volumes in non-resettable totalizers.
- The numbers on the right indicate volumes in resettable totalizers.
Use the CLR key to zero out the resettable totalizers.
PRE #1 (Preset 001) TOTALIZERS
Total Gross:0000006.31 0000006.31
Total Net :0000006.31 0000006.31
Total Mass :0000006.31 0000006.31
Authorized Gross:0000006.31 0000006.31
Authorized Net :0000006.31 0000006.31
Authorized Mass :0000006.31 0000006.31
Unauthorized Gross:0000000.00 0000000.00
Unauthorized Net :0000000.00 0000000.00
Unauthorized Mass :0000000.00 0000000.00
CLeaR Next Prev Exit

Toptech Systems MultiLoad II Specifications

General

Brand	Toptech Systems
Model	MultiLoad II
Category	Control Unit
Language	English