Toptech Systems MultiLoad II User Manual

Chapter 13 – Custom Logic
403
Firmware Version 3/4.31.37
Gross Delivered
Indicates the current gross volume delivered, of the
specified sampler, for the current batch. Value is in
thousandths with an implied decimal.
Pacing Rate
Indicates how often a sample will be taken for the
current batch, as defined by the product recipe. Value
is hundredths with an implied decimal
Current Target
Indicates the current target number of injections, of the
specified sampler, for the current batch.
Sampler State
Indicates the current state of the specified Sampler.
Each state will be represented as a numerical value
(see below).
State
Numeric Value
Inactive
0
Ready
1
Sampling
2
13.2.3 READ/WRITE CONFIGURATION PARAMETERS
The Read/Write Configuration groups are used to read and/or write the configuration parameters of the MultiLoad.
Reading a parameter will put the value of that parameter into the selected line custom logic line.
SELECT CUSTOM LOGIC READ PARAMETER
RCU CFG
BAY CFG
PRESET CFG
COMPONENT CFG
METER CFG
ADDITIVE CFG
SAMPLER CFG
Next Prev Exit Enter

Toptech Systems MultiLoad II Specifications

General

Brand	Toptech Systems
Model	MultiLoad II
Category	Control Unit
Language	English