Firmware Version 3/4.31.37
3.13 WINDOWS MULTIMATE CONFIGURATION TOOL
3.13.1 INSTALLATION
The MultiMate Configuration Tool program is typically distributed as a .ZIP file. The instructions below
describe the proper procedure to install and run the software.
1. Extract the zip file
2. Execute the setup.exe follow the instructions carefully
3. Optional, delete the MultiLoad_cfg.zip file.
4. Execute the MultiLoad_cfg.exe program. The program window opens:
5. Open the program under the all programs folder:
6. Following screen will appear
To Next Page
Loading...
Need help?
General
