Toptech Systems MultiLoad II User Manual

Chapter 4 – General Configuration
155
Firmware Version 3/4.31.37
4.16.1 PRESET NAME
The Preset can be assigned a name. This is will be displayed before the driver makes a product selection.
4.16.2 COMPONENT ASSIGNMENT
After defining your base components, this function allows assignment to the physical component.
When selected the Component Selection Screen is displayed:
Configure the assigned Base Component as shown in the example below.
PRE #1 (Preset 001) COMPONENT SELECTION
Comp #1: 000123 BASE87UNL
Next Prev Exit Enter
PRE #1 (Preset 001) COMPONENT SELECTION
Comp #1: BAS001 Base 001
Next Prev Exit Enter

Toptech Systems MultiLoad II Specifications

General

Brand	Toptech Systems
Model	MultiLoad II
Category	Control Unit
Language	English