Firmware Version 3/4.31.37
10.14 VIEW MULTILOAD II MESSAGE LOG
The MultiLoad II Message Log is a real-time event log. All authorization attempts, flow starts, flow stops, alarms
(raised or cleared), and various other events are logged with their dates and times. Particular events will also
cause totalizer values to be logged.
From the Views and Inquiry Menu select Message Log.
If a printer is configured the Message Log Menu screen is displayed which gives the user the option to print the
full log.
If a printer is not configured, or if the user selects View, the logs will be displayed on the screen.
Every two lines constitute a full message with the time of the log entry. The most recent entry will be displayed at
the top of the screen. To view earlier entries, press the Next key to scroll through the earlier entries.
10.15 VIEW MULTILOAD II AUDIT LOG
The MultiLoad II Config Change Log is a real-time log. All configuration changes on Levels Rcu, Bay, Preset,
Meter, Component, Additive and Trace are logged.
VIEW MESSAGE LOG
13:32:14 PROGRAM MODE ENTERED
13:32:11 Transaction Done
13:32:11 Preset 1, Batch Cleared
13:25:01 Preset 1, Flow Stopping at 500.
13:23:14 Preset 1, Flow Starting at 0.
13:23:13 Preset 1, Batch Authorized
prod=PRD001 vol=500
13:23:10 Transaction Stand-Alone
Authorized for 132
Next Prev Exit
To Next Page
Loading...
Need help?
General
