Toptech Systems MultiLoad II User Manual

Chapter 2 –System Description
32
Firmware Version 3/4.31.37
2.11.3 TYPE 3 PROGRAM / W&M SWITCHES
Type 3 switches consist of two separate external magnetic bolts, one for Program Mode Access, and one for
W&M change access. Program or W&M access is achieved by removing the corresponding bolt. Each bolt has
a small hole that can be sealed with a wire and lead seal to detect unauthorized access. The bolts also have an
external fold down cover that can be locked to prevent moving someone from removing either bolt. The cover
will also be stamped as “W&M” or “Program” to indicate the function of each bolt.
Figure 2.4 Type 3 Program / W&M Switches

Toptech Systems MultiLoad II Specifications

General

Brand	Toptech Systems
Model	MultiLoad II
Category	Control Unit
Language	English