Toptech Systems MultiLoad II User Manual

Chapter 9 – Weights & Measures
250
Firmware Version 3/4.31.37
The Network Test introduction screen displays:
Press Enter. The Network Test screen displays and the test begins.
Press Exit to end the test.
8.8 KEYPAD TEST
The Keypad test enables you to prove that the keypad is working by testing the individual keys.
1. From the DIAGNOSTICS MENU, choose Keypad.
NETWORK TEST
Host IP Address: 192.168.0.1
Tests Completed: 000063 Errors: 000000
64 bytes: icmp_seq= 0, time= <10ms
392 bytes: icmp_seq= 1, time= <10ms
720 bytes: icmp_seq= 2, time= <10ms
1048 bytes: icmp_seq= 3, time= <10ms
1376 bytes: icmp_seq= 4, time= <10ms
1704 bytes: icmp_seq= 5, time= <10ms
2032 bytes: icmp_seq= 6, time= <10ms
2360 bytes: icmp_seq= 7, time= <10ms
2688 bytes: icmp_seq= 8, time= <10ms
3016 bytes: icmp_seq= 9, time= <10ms
3344 bytes: icmp_seq=10, time= <10ms
3672 bytes: icmp_seq=11, time= <10ms
Exit CLeaR
NETWORK TEST
During this test, Ping packets
will be sent to the Host IP Address.
The Ethernet port must be:
enabled, properly configured, and
connected to the Host Computer.
Exit Enter

Toptech Systems MultiLoad II Specifications

General

Brand	Toptech Systems
Model	MultiLoad II
Category	Control Unit
Language	English