Toptech Systems MultiLoad II

Chapter 13 – Custom Logic
388
Firmware Version 3/4.31.37
13.2.2 REAL TIME VALUES
The Real Time Values group can be used read the MultiLoad’s current status, the current date and time, whether
the W&M bolt is in, current flow state, whether a component has been authorized, and many other useful real time
parameters.
RCU Real Time (RT)
Parameter
Description
Proving Mode
Indicates if the MultiLoad II is in Proving Mode
W&M Key
Indicates if the W&M key is active
Program Key
Indicates if the Program Key is active
Card Inserted
Indicates if a proximity card has been detected by the card reader
Hour
Current hour of the day
Minute
Current minute of the day
Second
Current second of the day
Year
Current year
Month
Current month
Day
Current day of the month
Julian Day
Converts the current date (year, month, and day) to the Julian Day Number
(JDN) equivalent.
Epoch Time
The current time in the Epoch Time format
SELECT CUSTOM LOGIC R.T. PARAMETER
RCU R.T.
BAY R.T.
PRESET R.T.
COMPONENT R.T.
METER R.T.
ADDITIVE R.T.
SAMPLER R.T.
Next Prev Exit Enter