Toptech Systems MultiLoad II User Manual

Chapter 10– Views and Inquiries
335
Firmware Version 3/4.31.37
Parameter Descriptions:
Density Input
Displays the live mA value that is being read by the analog input.
Density Unadjusted
Displays the real-time density.
Density Offset
Displays the current Density offset value, which is the difference between the
Density Unadjusted value and the Density Adjusted (observed density) value.
Density Adjusted
Displays the observed density as a result of applying the density offset.
10.7 VIEWING RELATIVE DENSITY
From the Views and Inquiry Menu select Relative Density. After selecting the preset and meter, the Relative
Density screen displays:
Parameter Descriptions:
Relative Density
Input
Displays the mA value that is currently being read by the analog input.
Relative Density
Unadjusted
Displays the real-time relative density.
Relative Density
Offset
Displays the current Relative Density Offset value, which is the difference
between the Relative Density Unadjusted value and the Relative Density
Adjusted (observed relative density) value.
Relative Density
Adjusted
Displays the observed relative density as a result of applying the relative density
offset.
PRE #1 MTR #1 RELATIVE DENSITY
Relative Density Input: 08.001mA
Relative Density Unadjusted:+0.3000
[1]Relative Density Offset: +0.0000
[2]Relative Density Adjusted: +0.3000
Next Prev Exit

Toptech Systems MultiLoad II Specifications

General

Brand	Toptech Systems
Model	MultiLoad II
Category	Control Unit
Language	English