Chapter 4 – General Configuration
Firmware Version 3/4.31.37
First select the Parameter.
Then you should see a flashing cursor, which means you are about to edit the parameter. From here you can
make the text upper case by pressing Prev, and make it lower case by pressing Next. In order to add the @
symbol you must first type in the first part of the eMail address, and then press Enter. Then you can enter in the
domain name.
NETWORK EMAIL SETUP
eMail (PORT 25): DISABLD
SMTP Server: mail.example.com
FROM: fromname@domain.com
toname@domain.com
Enter=@ Exit Prev=Upper Next=Lower
NETWORK EMAIL SETUP
E-Mail (PORT 25): DISABLD
SMTP Server: mail.example.com
FROM: fromname@domain.com
TO: toname@domain.com__________________
Next Prev Exit Enter
To Next Page
Loading...
Need help?
General
