Austro Engine E4 Series - Page 393

E4 Series
Maintenance Manual
Engine Oil
System
E4.08.04
Rev. 29
Page 203
79-Maintenance Procedures
01-Jul-2020
Detail Steps/Work Items
Key Items/References
(14)
Install the oil sump.
Refer to Fig. 79 - 4.
Torque: 1
st
step 6 Nm
2
nd
step 13 Nm
(15)
Install the oil filter housing drain line.
Refer to Section 79-20-00 Paragraph
4.B
(16)
Install the turbocharger oil return line.
Refer to Section 79-20-00 Paragraph
9.B
(17)
Install the belt tensioner.
Refer to Section 85-40-00 Paragraph
2.B.
(18)
Install the GPC bracket.
Tighten the two screws and the
spacer.
Torque 13 Nm.
(19)
Connect the crankshaft & oil level sensor
cable.
(20)
Install the gearbox.
Refer to Section 85-10-00 Paragraph
4.B.
(21)
Install the engine to the aircraft.
Refer to the applicable Aircraft
Maintenance Manual.
(22)
Fill in engine oil.
Refer to Section 79-20-00 Paragraph
5.B
(23)
Clean the working area.
(24)
Do an engine ground run.
Refer to Section 71-00-01.
(25)
Examine the oil system for leakage.