Datalogic Magellan 3450VSi - UPC-E Enable

Global Mid-Label ID Enter/Exit Programming Mode
Product Reference Guide 111
Case Conversion
This option can change the case of all alphabetic characters in scanned bar
code data to upper or lower case.
NOTE
Case conversion affects ONLY s
canned bar code data, and does not affect
Label ID, Prefix, Suffix, or other appended data.
To set this feature:
1. Scan the Enter/Exit Progr
amming Mode bar code.
2. Scan bar code for the desired option be
low. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by
scanning the Enter/Exit Pro-
gramming Mode bar code.
DEFAULT
033100(CR)
Case Conversion = No Case Conversion
033101(CR)
Case Conversion = Upper Case
033102(CR)
Case Conversion = Lower Case