Enter/Exit Programming Mode No Keyboard Support
92 Magellan™ 3450VSi
No Keyboard Support
Enables the scanner to perform host communications normally performed by an
attached keyboard.
To set this feature:
1. Scan the Enter/Exit Programming
Mode bar code.
2. Scan either the enable or disable bar code below. You’
ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by
scanning the Enter/Exit Pro-
gramming Mode bar code.
DEFAULT
No Keyboard Support = Disable
No Keyboard Support = Enable
To Next Page
Loading...
